special color - white LR5169 lrc surface mount chip leds approval sheet model no.: LR5169 11/10/2010 preliminary page 1/5
special color - white LR5169 introduction ............................................................................................................................. 3 product specification ......................................................................................................... 4 attention: electricstatic discharge (esd) protection............................................... 4 product specification ......................................................................................................... 5 electro-optical characteristics ..................................................................................... 5 package outline dimension ................................................................................................ 5 absolute maximum ratings ................................................................................................ 5 official product lrc pn.. LR5169 your part no. 11/10/2010 preliminary data sheet no. tentative product specifications are subject to changes for improvement without advance notice. proprietary data, drawings, and company confidential all rights reserved. page 2/5
special color - white LR5169 introduction ? the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by lrc for any infringements of intellectual property or other rights of the third parties which may result from it use. lrc is continually effort to improve the quality of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. it is the responsibility of the buyer, when utilizing lrc products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such lrc products cause loss of human life, bodily injury or damage to property. ? the lrc products listed in this document are intended for usage in general electronics (computer, personal equipment, office equipment, industrial robotics, domestic, etc ) these products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury. in developing your designs, please ensure that lrc products are used within specified operating ranges as set forth in the most recent lrc products specifications. also, please keep in mind the precautions listed in this document. ? ? ? official product lrc pn.. LR5169 your part no. 11/10/2010 preliminary data sheet no. tentative product specifications are subject to changes for improvement without advance notice. proprietary data, drawings, and company confidential all rights reserved. page 3/5
special color - white LR5169 product specification specification iv 2000 mcd above @20ma/ ta= 25 c tolerance: + 10% correlated color temperature vf refer to page 7~8 @20ma/ ta= 25 c 2.9-3.7v (0.1v/bin) @20ma ta= 25 c tolerance: + 0.05v ir resin carrier tape reel label packing bag carton others: every mid-box will be loaded 5 reels. these 5 reels can be different in lot, iv, lambda, or vf. every reel will have an independent label to identify its specification and the mid-box there will have a corresponding label post on it. < 100 a @ v r = 5 v yellow epoxy resin 2000pcs per reel o o o material quantity according to eia 481-1a specs conductive black tape according to eia 481-1a specs conductive black ht standard 220x240mm ht standard paper aluminum laminated bag/ no-zipper paper one reel one bag non-specified attention: electricstatic discharge (esd) protection the symbol shown on the page herein to introduce electro-optical characteristics . esd protection for gap and algaas based chips is still necessary even though they are safe in low static-electric discharge. parts built with alingap, gan, or/and ingan based chips are static sensitive devices. esd protection has to considered and taken in the initial design stage. if manual work/process is needed, please ensure the device is well protected from esd during all the process. official product lrc pn.. LR5169 your part no. 11/10/2010 preliminary data sheet no. tentative product specifications are subject to changes for improvement without advance notice. proprietary data, drawings, and company confidential all rights reserved. page 4/5
special color - white LR5169 product specification electro-optical characteristics (i f @ 20ma, t a 25 o c) product no. LR5169 lighting color white material ingan v f (v) min 2.9 max 3.7 color correlated color temperature(k) typ 5500~6500k i v (mcd) min 2000 typ 2200 * package outline dimension unit: mm tolerance: +/-0.1 outline dimension unit: mm soldering terminals may shift in x, y direction. absolute maximum ratings (t a 25 c) series LR5169 p d (mw) 111 i f (ma) 30 i fp (ma) 100 ** ir ( a) @ v r = 5 v <1 a t op ( o c) -30~+80 t st ( o c) -40~+85 o i fp ** condition for i fp is pulse of 1/10 duty and 0.1msec width. official product lrc pn.. LR5169 your part no. 11/10/2010 preliminary data sheet no. tentative product specifications are subject to changes for improvement without advance notice. proprietary data, drawings, and company confidential all rights reserved. page 5/5
|
